Ford Fusion: Lighting control
Lighting control positionsOff ASide and tail lamps BHeadlamps C
Autolamps
Note: If you have switched autolampson, you can only switch the main beamon when autolamps has switched theheadlamps on.
The headlamps will come on and go offautomatically depending on the ambientlight.
Home safe lighting
You can switch home safe lighting on upto 10 minutes after you have switched theignition off.
Vehicles without autolamps
Switch the headlamps on and then switchthem off within two seconds.
Vehicles with autolamps
a. Switch autolamps on and then switchthem off within two seconds.
b. Switch autolamps off and then switchthem on within two seconds.
Welcome lighting
The side and tail lamps will come on whenyou unlock the doors with the remotecontrol. They will switch off automaticallyafter a short time.
Main/dipped beam
Pull the lever fully towards the steeringwheel to switch between main anddipped beam.
Headlamp flasher
Pull the lever slightly towards the steeringwheel.
Lighting
...Front fog lamps
Front fog lamps Note: It is not possible to switch on thefront fog lamps when the lighting switchis set to AUTO. To switch on the front foglamps, switch off the autolamps feature. Switch on the head ...See also:
Storing the current speed or calling up
a stored speed
WARNING
The set speed stored in memory should only
be set again if prevailing road conditions and
legal speed limits permit. Possible
acceleration or deceleration differences
arising from ...
115 V power socket
WARNING
The 115V AC socket operates at high voltage.
Use the 115V AC socket in the vehicle with
the same caution and prudence that you
exercise when using power outlets at home.
Keep any fl ...
Seat belt restraint system
WARNING
• For maximum restraint system protection, the seat belts must always be used
whenever the car is moving.
• Seat belts are most effective when seatbacks are in the upright position.
â ...