Buick Regal: Clock - Controls - Instruments and Controls - Buick Regal Owners ManualBuick Regal: Clock

The infotainment system controls are used to access the time and date settings through the menu system. See Operation  for information about how to use the menu system.

Setting the Time and Date

1. Press the CONFIG button and select Time and Date Settings.

2. Select Set Time or Set Date.

3. Turn the 4. Press the  knob to select the next value. knob to adjust the highlighted value.

4. Press the 5. To save the time and return to the Time Settings menu, press the BACK button at any time or press the  knob after adjusting the minutes. knob to select the next value.

5. To save the time and return to the Time Settings menu, press the BACK button at any time or press the Setting the 12/24 Hour Format knob after adjusting the minutes.

Setting the 12/24 Hour Format

1. Press the CONFIG button and select Time and Date Settings.

2. Highlight 12/24 HR Format.

3. Press the Setting the Month and Day Format knob to select the 12 hour or 24 hour display format.

Setting the Month and Day Format

1. Press the CONFIG button and select Time and Date Settings.

2. Highlight Month & Day format.

3. Press the Power Outletsknob to select DD/MM/YYYY (day/month/year), MM/DD/YYYY (month/day/year), or YYYY/MM/DD (year/month/ day) display format.

    Compass
    There is a compass display in the Driver Information Center (DIC). The compass receives its heading and other information from the Global Positioning System (GPS) antenna, StabiliTrak, and vehicle sp ...

    Power Outlets
    The accessory power outlet can be used to plug in electrical equipment, such as a cell phone or MP3 player. This outlet is located under the armrest inside the center console storage. The outlet is ...

    See also:

    Resetting Active Head Restraints (AHR)
    If the Active Head Restraints are triggered in an accident, you must reset the head restraint on the driver’s and front passenger seat. You can recognize when the Active Head Restraint has bee ...

    Tachometer
    The red band in the tachometer indicates the engine's overrevving range. ! Do not drive in the overrevving range, as this could damage the engine. The fuel supply is interrupted to protect the ...

    The Blind Spot Monitor detection areas
    The blind spot that vehicles can be detected in are outlined below. The range of the detection area extends to: Approximately 11.5 ft. (3.5 m) from the side of the vehicle The first 1.6 ...