Hyundai Sonata: Filter replacement
It must be replaced when necessary, and should not be cleaned and reused. You can clean the filter when inspecting the air cleaner element. Clean the filter by using compressed air.
1. Loosen the air cleaner cover attaching clips and open the cover.
2. Wipe the inside of the air cleaner.
3. Replace the air cleaner filter.
4. Lock the cover with the cover attaching clips.
Replace the filter according to the Maintenance Schedule. If the vehicle is operated in extremely dusty or sandy areas, replace the element more often than the usual recommended intervals. (Refer to “Maintenance under severe usage conditions” in this section.)
CAUTION
• Do not drive with the air cleaner removed; this will result in excessive engine
wear.
• When removing the air cleaner filter, be careful that dust or dirt does not enter
the air intake, or damage may result.
• Use a HYUNDAI genuine part. Use of non-genuine parts could damage the air flow
sensor.
Air cleaner
...See also:
Replacing Brake System Parts
The braking system on a vehicle is
complex. Its many parts have to be
of top quality and work well together
if the vehicle is to have really good
braking. The vehicle was designed
and tested ...
Recommended shifting speeds
The best compromise between fuel economy and vehicle performance during normal
driving is ensured by shifting up at the speeds listed in the following table.
...
How to use the SETTING button
When the SETTING button is pressed, the Settings
screen will appear on the display. You can
select and/or adjust several functions, features
and modes that are available for your vehicle.
...