Chrysler 200: Tire Psi
Press and release the MENU button until Tire PSI is displayed.
Tire pressure information is displayed as follows:
• If tire pressure is OK for all tires, TIRE and a vehicle graphic are displayed with tire pressure values in each corner or the graphic.
• If one or more tires have low pressure, LOW TIRE and a vehicle graphic are displayed with tire pressure values in each corner of the graphic. Tire pressure values that are too low will be flashing.
• If the Tire Pressure System requires service, Check TPM System is displayed. Tire PSI is an information only function and cannot be reset.
Distance To Empty (DTE)
Shows the estimated distance that can be traveled with the fuel remaining in the tank. This estimated distance is determined by a weighted average of the instantaneous and average fuel economy, ...Elapsed Time
Shows the total elapsed time of travel since the last reset. Elapsed time will increment when the ignition switch is in the RUN or START position. Elapsed time is displayed as follows: hours:minu ...See also:
Seat fabric
Remove loose dirt, dust or debris with a vacuum cleaner. If the dirt is caked
on the fabric or hard to remove with a vacuum cleaner, use a soft brush then vacuum
it. Wipe the fabric surface with a ...
To Disarm The System
Either press the UNLOCK button on the RKE transmitter
or insert a valid Sentry Key into the ignition lock
cylinder and turn the key to the ON/START position.
NOTE:
• The driver’s door key cy ...
Extending and retracting the cargo
compartment cover
•► To extend: pull cargo compartment
cover 1 back by grab handle 2 and clip
it into the retainers on the left and right.
•► To retract: unhook cargo compartment
cover 1 from ...