Mercedes-Benz E-Class: Activating/deactivating Lane Keeping Assist
You can use the Lane Keep. Asst. function to activate/deactivate Lane Keeping Assist or Active Lane Keeping Assist.
•► Press the button on the steering wheel to select the DriveAssist menu.
•► Press the button to select Lane Keep. Asst..
•► Press .
If the function is activated, the road markings are shown in red in the multifunction display.
•► To activate/deactivate: press again.
If Lane Keeping Assist or Active Lane keeping Assist is activated, the multifunction display shows the symbol when the ignition is switched on.
Activating/deactivating Blind Spot Assist
You can use the Blind Spot Asst. function to activate or deactivate Blind Spot Assist or Active Blind Spot Assist. •► Press on the steering wheel to select the DriveAssist menu. •` ...Service menu
In the Serv. menu you can: - call up display messages - restart the tire pressure loss warning system (Canada only) Rcheck the tire pressure electronically - call up the ...See also:
Scheduled maintenance service
Follow Normal Maintenance Schedule if the vehicle is usually operated where none
of the following conditions apply. If any of the following conditions apply, follow
Maintenance Under Severe Usage ...
Brake fluid
Checking the brake fluid level
Check the fluid level in the reservoir periodically.
The fluid level should be between MAX and MIN marks on the side of the reservoir.
Before removing the reservoir ...
Starting the Vehicle with a Low
Transmitter Battery
If the transmitter battery is weak, the
DIC may display NO REMOTE
DETECTED when you try to start
the vehicle. The REPLACE
BATTERY IN REMOTE KEY
message may also be displayed at
this time.
...