Chrysler 200: Body Lubrication - Maintenance Procedures - Maintaining your vehicle - Chrysler 200 Owners ManualChrysler 200: Body Lubrication

Locks and all body pivot points, including such items as seat tracks, door hinge pivot points and rollers, liftgate, tailgate, sliding doors and hood hinges, should be lubricated periodically with a lithium based grease, such as MOPAR Spray White Lube or equivalent, to assure quiet, easy operation and to protect against rust and wear. Prior to the application of any lubricant, the parts concerned should be wiped clean to remove dust and grit; after lubricating excess oil and grease should be removed. Particular attention should also be given to hood latching components to ensure proper function.

When performing other underhood services, the hood latch, release mechanism and safety catch should be cleaned and lubricated.

The external lock cylinders should be lubricated twice a year, preferably in the Fall and Spring. Apply a small amount of a high quality lubricant, such as MOPAR Lock Cylinder Lubricant or equivalent directly into the lock cylinder.

    A/C Air Filter – If Equipped
    Refer to the “Maintenance Schedule” for the proper maintenance intervals. WARNING! Do not remove the A/C Air Filter while the blower is operating or personal injury may result. The A/C Air ...

    Windshield Wiper Blades
    Clean the rubber edges of the wiper blades and the windshield periodically with a sponge or soft cloth and a mild non-abrasive cleaner or use the washer solvent. This will remove accumulations o ...

    See also:

    Acceleration
    Rapid acceleration on snow covered, wet, or other slippery surfaces may cause the driving wheels to pull erratically to the right or left. This phenomenon occurs when there is a difference in th ...

    Engine compartment — 2.7L
    ENGINE COMPARTMENT — 2.7L 1 — Engine Coolant Reservoir. 7 — Power Distribution Center. 2 — Coolant Pressure Cap. 8 — Air Cleaner Filter. 3 — Power Steering Fluid Reservoir. 9 — ...

    Checking engine coolant level
    Check the coolant level in the reservoir when the engine is cold. If the coolant level is below the MIN level (B)- , add coolant to the MAX level (A) . If the reservoir is empty, check the coola ...