Ford Fusion: Changing the remote control battery
Make sure that you dispose ofold batteries in anenvironmentally friendly way.
Seek advice from your local authorityregarding recycling.
If the range of the transmitter in the keydecreases gradually, the battery (type 3VCR 2032) should be replaced.
• Carefully separate the transmitter unitfrom the key using a flat object (e.g. ascrewdriver) at the recess on theback.
• Carefully prise out the battery with theflat object. Fit the new batterybetween the contacts with the + signfacing downwards. Reassemble thetransmitter unit in reverse order.
• Open the transmitter unit byseparating the retaining clips on thesides with the flat object.
• Carefully prise out the battery with theflat object. Fit the new batterybetween the contacts with the + signfacing downwards. Reassemble thetransmitter unit in reverse order.
Programming the remote control
A maximum of four remote controls(including the ones supplied with thevehicle) can be programmed.
To programme a new remote control:
• Turn the ignition key to position II fourtimes within six s ...
Locks
...
See also:
Headlight indicator light
This indicator light illuminates under the following conditions.
● when the light switch is turned to the “”
or “” position
● when the light switch is in the “AUTO” posit ...
S mode
●When the shift range is “4” or lower, holding the shift lever toward “+”
sets
the shift range to “6”.
●To prevent the engine from over-revving, upshifting may automatical ...
Storage Compartments
WARNING:
Keep storage boxes closed when driving:
Driving with the storage boxes open is dangerous. To reduce the possibility of
injury in an accident or a sudden stop, keep the storage boxes close ...
