Chrysler 200: Cooling System
WARNING!
• When working near the radiator cooling fan, disconnect
the fan motor lead or turn the ignition
switch to the LOCK position. The fan is temperature
controlled and can start at anytime the ignition
switch is in the ON position.
• You or others can be badly burned by hot engine coolant (antifreeze) or steam from your radiator. If you see or hear steam coming from under the hood, do not open the hood until the radiator has had time to cool. Never try to open a cooling system pressure cap when the radiator is hot.
- Coolant Checks
- Cooling System – Drain, Flush, And Refill
- Selection Of Coolant
- Adding Coolant
- Cooling System Pressure Cap
- Disposal Of Used Engine Coolant
- Coolant Level
- Points To Remember
Exhaust System
The best protection against carbon monoxide entry into
the vehicle body is a properly maintained engine exhaust
system.
If you notice a change in the sound of the exhaust system;
or if the exha ...
Coolant Checks
Check engine coolant (antifreeze) protection every
12 months (before the onset of freezing weather, where
applicable). If the engine coolant (antifreeze) is dirty or
rusty in appearance, the sys ...
See also:
CVT models
There is no oil level gauge. To check the front differential gear oil level,
we recommend that you consult your SUBARU dealer for inspection. ...
Front seat
Manual adjustment
Forward and rearward
To move the seat forward or rearward:
1. Pull the seat slide adjustment lever up and hold it.
2. Slide the seat to the position you desire.
3. Release the ...
Replacement Bulbs
All the inside bulbs are brass or glass wedge base.
Aluminum base bulbs are not approved and should not
be used for replacement.
LIGHT BULBS – Interior Bulb No.
Front Courtesy/Reading Lamp . . ...
