Mercedes-Benz E-Class: Instrument cluster
Selecting the unit of measurement for distance
The Display Unit Speed-/Odometer:
function allows you to choose whether certain displays appear in kilometers or miles.
The selected unit of measurement for distance applies to:
- the digital speedometer in the Trip menu
- the odometer and the trip odometer
- the trip computer
- the current consumption and the range
- the navigation instruction in the Navi menu
- DISTRONIC PLUS
- ASSYST PLUS service interval display
•► Press the button on the steering wheel to select the Settings menu.
•► Press the button to select the Instr. cluster submenu.
•► Press the a button to confirm.
•► Press the button to select the Display Unit Speed-/Odometer function.
You will see the selected setting: km or miles.
•► Press the button to save the setting.
Selecting the permanent display function
The Permanent Display: function allows you to choose whether the multifunction display always shows the outside temperature or the speed in km/h (USA) or mph (Canada).
•► Press the button on the steering wheel to select the Settings menu.
•► Press the button to select the Instr. cluster submenu.
•► Press the button to confirm.
•► Press the button to select the Permanent display function.
You will see the selected setting Outside Temperature or Speedometer [km/h]:.
•► Press the button to save the setting.
Introduction
The Sett. menu can be used for: - changing the instrument cluster settings - changing the light settings - changing the vehicle settings - changing the convenien ...Lights
Switching the daytime running lamps on/ off This function is not available in Canada. If you have activated the Day Lights function and the light switch is in the or position, the daytime r ...See also:
Brake Assist
This vehicle has a brake assist feature designed to assist the driver in stopping or decreasing vehicle speed in emergency driving conditions. This feature uses the stability system hydraulic brake co ...
Charge warning light
If this light illuminates when the engine is running, it may indicate that the
charging system is not working properly.
If the light illuminates while driving or does not turn off after the engin ...
Programming HomeLink
1. To begin, press and hold the two outer HomeLink buttons (to clear the memory)
until the indicator light (1) blinks (after 20 seconds). Release both buttons.
2. Position the end of the hand-hel ...