Volvo S60: Jump starting - Starting the engine - Your driving environment - Volvo S60 Owners ManualVolvo S60: Jump starting

Connecting the jumper cables

Connecting the jumper cables

Follow these instructions to jump start your vehicle's dead battery or to jump start another vehicle's dead battery using your vehicle. If the 12-volt auxiliary battery to be used is in another vehicle, check that the vehicles are not touching to prevent premature completion of a circuit. Be sure to follow jump starting instructions provided for the other vehicle.

To jump start your vehicle:

1. Switch off the ignition (set the ignition to mode 0, see page 86).

2. First connect the red jumper cable to the auxiliary battery's positive (+) terminal (1).

3. Fold back the cover over the positive (+) terminal on your vehicle's battery (2), marked with a "+" sign, located under a folding cover.

4. Connect the black jumper cable to the auxiliary battery's negative (–) terminal (3) and to the ground point in your vehicle's engine compartment (right engine mount at the top, on the outer screw) (4).

5. Start the engine in the assisting vehicle, then start the engine in the vehicle with dead battery.

6. After the engine has started, first remove the negative (–) terminal jumper cable (black). Then remove the positive (+) terminal jumper cable (red).

WARNING PROPOSITION 65 WARNING! WARNING PROPOSITION 65 WARNING!

Battery posts, terminals, and related accessories contain lead and lead compounds, chemicals known to the state of California to cause cancer and reproductive harm. Wash hands after handling.

CAUTION

Connect the jumper cables carefully to avoid short circuits with other components in the engine compartment.

WARNING WARNING

  • Do not connect the jumper cable to any part of the fuel system or to any moving parts. Avoid touching hot manifolds.
  • Batteries generate hydrogen gas, which is flammable and explosive.
  • Battery fluid contains sulfuric acid. Do not allow battery fluid to contact eyes, skin, fabrics or painted surfaces. If contact occurs, flush the affected area immediately with water. Obtain medical help immediately if eyes are affected.
  • Never expose the battery to open flame or electric spark.
  • Do not smoke near the battery.
  • Failure to follow the instructions for jump starting can lead to injury
    Switching off the engine
    With the engine running, press the START/ STOP ENGINE button. If the gear selector is not in the P position or if the vehicle is moving, press the button twice or press and hold it in until the eng ...

    See also:

    Check Fuel Cap Message
    Your vehicle’s onboard diagnostic system will detect a loose or missing fuel fill cap as an evaporative system leak. The first time a leak is detected a ‘‘CHECK FUEL CAP’’ message ...

    Display settings
    Select the “Display” key. On the screen above, select the “Display Adjustment” key. The Display Adjustment screen will appear. Brightness/contrast: Select the “Brightness” key or t ...

    If the malfunction indicator lamp comes on while driving
    First check the following: ●Is the fuel tank empty? If it is, fill the fuel tank immediately. ●Is the fuel tank cap loose? If it is, tighten it securely. The malfunction indicator lam ...