Ford Fusion: Parking brake
Applying the parking brake
WARNING:
Make sure that the parking brake isapplied before you release the lever.
Note: Do not press the release buttonwhen you apply the parking brake.
1. Press the brake pedal firmly.
2. Pull the parking brake lever upwardsto its fullest extent.
Parking on a hill
If you have to park facing uphill, select firstgear and turn the front wheels away fromthe kerb. If you have to park facingdownhill, select reverse gear and turn thefront wheels towards the kerb.
Releasing the parking brake
1. Press the brake pedal firmly.
2. Pull the parking brake lever upwardsslightly, press the release button andpush the lever downwards.
Hints on driving with ABS
When the ABS is operating, the brakepedal will pulse. This is normal. Maintainpressure on the brake pedal.
The ABS will not eliminate the dangersinherent when:
• you drive too close to the vehicle ...
See also:
Vehicle load limit
Tire and loading information label
The label located on the driver's door sill gives the original tire size, cold
tire pressures recommended for your vehicle, the number of people that ca ...
Vehicle Dynamics Control warning light/Vehicle Dynamics Control operation indicator
light
The light illuminates when the ignition switch is turned to the “ON” position
and turns off several seconds after the engine has started. This lighting pattern
indicates that the Vehicle Dyn ...
Safety Belts
This section of the manual describes how to use safety belts properly. It also describes some things not to do with safety belts.
WARNING
Do not let anyone ride where a safety belt cannot be worn ...