Chrysler 200: Seat Belt Maintenance
Do not bleach, dye, or clean the belts with chemical solvents or abrasive cleaners. This will weaken the fabric.
Sun damage can also weaken the fabric.
If the belts need cleaning, use a mild soap solution or lukewarm water. Do not remove the belts from the car to wash them. Dry with a soft cloth.
Replace the belts if they appear frayed or worn or if the buckles do not work properly.
Cleaning Plastic Instrument Cluster Lenses
The lenses in front of the instruments in this vehicle are
molded in clear plastic. When cleaning the lenses, care
must be taken to avoid scratching the plastic.
1. Clean with a wet, soft rag. A ...
Cleaning Center Console Cupholders
Removal
Grab the rubber portion of the cupholder and lift
upward.
Cleaning
Soak the rubber cupholder liner in a mixture of medium
hot tap water and one teaspoon of mild liquid dish soap.
Let s ...
See also:
Fuel recommendation
NISSAN recommends the use of premium unleaded gasoline with an octane rating
of at least 91 AKI (Anti-Knock Index) number (Research octane number 96). If unleaded
premium gasoline is not available ...
Operating tips
-When the engine coolant temperature and outside air temperature are low, the
air flow from the foot outlets may not operate for a maximum of 150 seconds. However,
this is not a malfunction. Aft ...
Location of the keyless drive antennas
The keyless drive system has a number of antennas located at various points in
the vehicle.
1 - On the inside center of the rear bumper
2 - Left rear door handle
3 - Center of the parcel shelf, ...
