Subaru Legacy: Seatbelt maintenance
To clean the seatbelts, use a mild soap and lukewarm water. Never bleach or dye the belts because this could seriously affect their strength.
Inspect the seatbelts and attachments including the webbing and all hardware periodically for cracks, cuts, gashes, tears, damage, loose bolts or worn areas. Replace the seatbelts even if only minor damage is found.
CAUTION
● Keep the belts free of polishes, oils, chemicals and particularly battery acid.
● Never attempt to make modifications or changes that will prevent the seatbelt from operating properly.
Unfastening the rear center seatbelt
Push the release button of the center seatbelt buckle (on the left-hand side)
to unfasten the seatbelt.
1. Insert a key or other hard pointed object into the slot in the connector (buckle)
...
Front seatbelt pretensioners
The driver’s and front passenger’s seatbelts have a seatbelt pretensioner. The
seatbelt pretensioners are designed to be activated in the event of an accident
involving a moderate to severe ...
See also:
To turn system off
Press the /OFF button. ...
Automatic transaxle fluid
Checking the automatic transaxle fluid level
The automatic transaxle fluid level should be checked regularly.
Keep the vehicle on the level ground with the parking brake applied and check
the fl ...
Remote Key Unlock, Driver Door/All Doors First
Press
This feature lets you program the system to unlock either
the driver’s door or all doors on the first press of the
UNLOCK button on the RKE transmitter. To change the
current setting, proceed ...
