Toyota Camry: The Blind Spot Monitor detection areas - BSM (Blind Spot Monitor) - Using other driving systems - When driving - Toyota Camry Owners ManualToyota Camry: The Blind Spot Monitor detection areas

The blind spot that vehicles can be detected in are outlined below.

The range of the detection area extends to:

  1. Approximately 11.5 ft. (3.5 m) from the side of the vehicle
    The first 1.6 ft. (0.5 m) from the side of the vehicle is not in the detection area
  2. Approximately 9.8 ft. (3 m) from the rear bumper
  3. Approximately 3.3 ft. (1 m) forward of the rear bumper
    BSM (Blind Spot Monitor)
    The Blind Spot Monitor is a system that assists the driver in making the decision to change lanes. The system uses radar sensors to detect vehicles that are traveling in an adjacent lane in the a ...

    The Blind Spot Monitor is operational when
    The BSM main switch is set to on and vehicle speed is greater than about 25 mph (40 km/h) ...

    See also:

    Electronic Brake Force Distribution (EBD) system
    The EBD system maximizes the effectiveness of the brakes by allowing the rear brakes to supply a greater proportion of the braking force. It functions by adjusting the distribution of braking forc ...

    Jack Location
    The jack and jack-handle are stowed under the load floor in the trunk. ...

    Child Restraint Systems
    (A) Rear-Facing Infant Seat A rear-facing infant seat (A) provides restraint with the seating surface against the back of the infant. The harness system holds the infant in place and, in a ...