Buick Regal: Tire Messages
TIRE PRESSURE LOW ADD AIR TO TIRE
On vehicles with the Tire Pressure Monitor System (TPMS), this message displays when the pressure in one or more of the vehicle's tires is low.
The low tire pressure warning light will also come on. See Tire Pressure Light .
If a tire pressure message appears on the DIC, stop as soon as you can. Inflate the tires by adding air until the tire pressure is equal to the values shown on the Tire and Loading Information label. See Tires , Vehicle Load Limits , and Tire Pressure .
You can receive more than one tire pressure message at a time.
To read the other messages that may have been sent at the same time, press the SET/CLR button.
The DIC also shows the tire pressure values. See Driver Information Center (DIC) .
SERVICE TIRE MONITOR SYSTEM
This message displays if there is a problem with the Tire Pressure Monitor System (TPMS). See Tire Pressure Monitor Operation for more information.
TIRE LEARNING ACTIVE
This message displays when the system is learning new tires. See Tire Pressure Monitor Operation for more information.
Anti-theft Alarm System Messages
THEFT ATTEMPTED This message displays if the vehicle detects a tamper condition. ...Transmission Messages
SERVICE TRANSMISSION This message displays if there is a problem with the transmission. See your dealer. SHIFT TO PARK This message displays when the transmission needs to be shifted to P (Park). ...See also:
Brake Pedal Travel
See your dealer if the brake pedal
does not return to normal height,
or if there is a rapid increase in
pedal travel. This could be a sign
that brake service might be
required. ...
Sliding the moonroof
To fully open the moonroof, push the switch
toward 1 .
To fully close the moonroof, push the switch
toward 2 .
To open or close the moonroof part way, push the
switch in any direction while the ...
Turn signal lever
To activate the right turn signal, push the turn signal lever up. To activate
the left turn signal, push the turn signal lever down. When the turn is finished,
the lever will return automaticall ...