Honda Accord: To Play a Disc
Select the changer by pressing the CD button. The system will begin playing the last selected disc in the disc changer. You will see the current disc position highlighted.
To select a different disc, press the corresponding number on the preset buttons, or turn the interface knob to highlight the desired disc number, then press ENTER on the interface selector.
The player can play CD-TEXT, MP3, andWMA formats.
When you play CD-TEXT, you will see the track name, artist name, and album name on the screen. When you play MP3/WMA discs, you will see the track name and folder name on the screen. If the disc was not recorded with this information, it will not be displayed.
Loading Discs in the Changer
To load multiple discs in one operation: 1. With the ignition in the ACCESSORY (I) or the ON (II) position, press and hold the LOAD button until you hear a beep and see ‘‘LOAD’’ in ...To Change Tracks
Each time you press and release the side of the skip bar or push the interface selector to the right, the player skips forward to the beginning of the next track. Press and release the sid ...See also:
Introduction
Volvo recommends the use of Volvo trailer hitches that are specially designed
for the vehicle.
NOTE
See page 337 for the maximum trailer and tongue weights recommended by Volvo.
Observe t ...
Starting a diesel engine
Cold or hot engine
All vehicles
Note: When the temperature is below-15ºC (5ºF), you may need to crank theengine for up to 25 seconds. If youconsistently operate the vehicle in suchtemperat ...
Removing the skis and folding up the
skibag
•► Loosen the two straps.
•► Remove hook 1 from securing ring 2.
•► Take the skis out of the skibag.
•► Close the flap in the trunk.
•► Smooth out the skiba ...