Buick Regal: Top Tether Anchor
A top tether (A, C) anchors the top of the child restraint to the vehicle.
A top tether anchor is built into the vehicle. The top tether attachment (B) on the child restraint connects to the top tether anchor in the vehicle in order to reduce the forward movement and rotation of the child restraint during driving or in a crash.
The child restraint may have a single tether (A) or a dual tether (C).
Either will have a single attachment (B) to secure the top tether to the anchor.
Some child restraints that have a top tether are designed for use with or without the top tether being attached. Others require the top tether always to be attached. In Canada, the law requires that forward-facing child restraints have a top tether, and that the tether be attached. Be sure to read and follow the instructions for the child restraint.
Lower Anchors
Lower anchors (A) are metal bars built into the vehicle. There are two lower anchors for each LATCH seating position that will accommodate a child restraint with lower attachments (B). ...
Lower Anchor and Top Tether Anchor Locations
Rear Seat
(Top Tether Anchor):
Seating positions with top tether anchors.
(Lower Anchor): Seating positions with two lower anchors.
To assist you in locating the lower anchors, each rear anc ...
See also:
Emissions inspection and maintenance programs
In some localities, it may be a legal
requirement to passan inspection of your vehicle’s emissions control system.
Failure to pass could prevent vehicle registration.
For states that require an ...
Remote start system — if equipped
This system uses the Remote Keyless Entry(RKE) transmitter to start the engine
convenientlyfrom outside the vehicle while stillmaintaining security. The system
has a range ofapproximately 300 ft ...
Driving tips
This chapter provides you with information useful
in dealing with specific driving and operating
modes. ...
