Subaru Legacy: Unfastening the front seatbelt - Fastening the seatbelt - Seatbelts - Seat, seatbelt and SRS airbags - Subaru Legacy Owners ManualSubaru Legacy: Unfastening the front seatbelt

Push the button on the buckle.

Push the button on the buckle.

Before closing the door, make sure that the belts are retracted properly to avoid catching the belt webbing in the door.

    Adjusting the front seat shoulder belt anchor height
    The shoulder belt anchor height should be adjusted to the position best suited for the driver/front passenger. Always adjust the anchor height so that the shoulder belt passes over the middle of ...

    Rear seatbelts (except rear center seatbelt on Outback)
    1. Sit well back in the seat. 2. Pick up the tongue plate and pull the belt out slowly. Do not let it get twisted. If the belt stops before reaching the buckle, return the belt slightly and pull ...

    See also:

    Windshield Wiper Blades
    Clean the rubber edges of the wiper blades and the windshield periodically with a sponge or soft cloth and a mild non-abrasive cleaner or use the washer solvent. This will remove accumulations o ...

    Gasoline Specifications (U.S. and Canada Only)
    At a minimum, gasoline should meet ASTM specification D 4814 in the United States or CAN/CGSB-3.5 or 3.511 in Canada. Some gasolines contain an octane-enhancing additive called methylcyclopentadienyl ...

    Closing
    WARNING To prevent possible personal injury, always keep hands and fingers away from the trunk/cargo compartment opening when closing the trunk lid/tailgate. Be especially careful when sm ...