Subaru Legacy: Unfastening the rear center seatbelt - Fastening the seatbelt - Seatbelts - Seat, seatbelt and SRS airbags - Subaru Legacy Owners ManualSubaru Legacy: Unfastening the rear center seatbelt

Push the release button of the center seatbelt buckle (on the left-hand side)

Push the release button of the center seatbelt buckle (on the left-hand side) to unfasten the seatbelt.

1. Insert a key or other hard pointed object into the slot in the connector (buckle)

1. Insert a key or other hard pointed object into the slot in the connector (buckle) on the right-hand side and push it in, and the connector (tongue) plate will disconnect from the buckle.

2. Allow the retractor to roll up the belt. You should hold the webbing end and

2. Allow the retractor to roll up the belt. You should hold the webbing end and guide it back into the retractor while it is rolling up. Neatly store the tongue plate in the recess and then insert the connector (tongue) plate into the slot.

CAUTION

CAUTION

● Do not allow the retractor to roll up the seatbelt too quickly. Otherwise, the metal tongue plates may hit against the trim, resulting in damaged trim.

● Have the seatbelt fully rolled up so that the tongue plates are neatly stored. A hanging tongue plate can swing and hit against the trim during driving, causing damage to the trim.

    Rear center seatbelt on Outback
    1) Center seatbelt tongue plate 2) Connector (tongue) 3) Connector (buckle) 4) Center seatbelt buckle WARNING Fastening the seatbelt with the webbing twisted can increase the risk or severity ...

    Seatbelt maintenance
    To clean the seatbelts, use a mild soap and lukewarm water. Never bleach or dye the belts because this could seriously affect their strength. Inspect the seatbelts and attachments including the web ...

    See also:

    Loading Discs in the Changer
    To load multiple discs in one operation: 1. With the ignition in the ACCESSORY (I) or the ON (II) position, press and hold the LOAD button until you hear a beep and see ‘‘LOAD’’ in ...

    Trailer hitch
    Choose a proper hitch for your vehicle and trailer. Make sure the trailer hitch is securely attached to the vehicle, to help avoid personal injury or property damage due to sway caused by crosswind ...

    Care of the HUD
    Clean the inside of the windshield as needed to remove any dirt or film that could reduce the sharpness or clarity of the HUD image. To clean the HUD lens, use a soft, clean cloth that has ho ...