Chrysler 200: Cooling System – Drain, Flush, And Refill
If the engine coolant (antifreeze) is dirty or contains a considerable amount of sediment, clean and flush with a reliable cooling system cleaner. Follow with a thorough rinsing to remove all deposits and chemicals. Properly dispose of the old engine coolant (antifreeze).
Refer to the “Maintenance Schedule” for the proper maintenance intervals.
Coolant Checks
Check engine coolant (antifreeze) protection every
12 months (before the onset of freezing weather, where
applicable). If the engine coolant (antifreeze) is dirty or
rusty in appearance, the sys ...
Selection Of Coolant
Use only the manufacturer’s recommended coolant. Refer
to “Fluids, Lubricants, and Genuine Parts” in “Maintaining
Your Vehicle” for further information.
CAUTION!
• Mixing of engine c ...
See also:
Using the Re-dial Command
1. Press
.
► For vehicles without a navigation system, the system responds “Ready,” followed by a tone.
► For vehicles with a navigation system, the system responds with a tone. Aft ...
Demanding driving
In demanding driving conditions, such as operating the vehicle in hot weather,
towing a trailer, or driving for extended periods at higher altitudes than normal,
it may be advisable to switch to h ...
Touching up paintwork
Paint code on the model plate
Paint damage requires immediate attention to avoid rusting. Make it a habit to
check the finish regularly, for instance washing the vehicle. Touch-up if necessary.
...
