Ford Fusion: Lighting - Ford Fusion Owners manualFord Fusion: Lighting

Changing the wiper blades
Changing the wiper blades Lift the wiper arm and position the wiperblade at a right angle to the wiper arm. Toremove, press the retaining clip in thedirection of the arrow, disengage thewiper blade a ...

Lighting control
Lighting control positionsOff ASide and tail lamps BHeadlamps C Autolamps Note: If you have switched autolampson, you can only switch the main beamon when autolamps has switched theheadlamps on. Th ...

See also:

Recommended Fuel
Use regular unleaded gasoline with a posted octane rating of 87 or higher. If the octane rating is less than 87, an audible knocking noise, commonly referred to as spark knock, might be hear ...

The Blind Spot Monitor is operational when
The BSM main switch is set to on and vehicle speed is greater than about 25 mph (40 km/h) ...

Storing
1. Switch on the ignition. 2. Set the desired position. 3. Press the button. The LED in the button lights up. 4. Press the desired button 1 or 2. The LED goes out. If the M button is pressed ...